Maximilian
- Total activity 203
- Last activity
- Member since
- Following 0 users
- Followed by 0 users
- Votes 2
- Subscriptions 102
Activity overview
Latest activity by Maximilian-
Maximilian created an article,
How Konstru handles Units
Konstru stores all model data in millimeters but this doesn't affect what you are working in because Konstru translates on download into platform document units. So let's say you are working in ft...
-
Maximilian created an article,
Generic Geometry Elements
Konstru now supports GeoElements to send any kind of geometry with attributes between Grasshopper, Dynamo, Excel and Revit. GeoElements are accepting Curves, NurbsSurfaces or Meshes as an input wh...
-
Maximilian created an article,
Rhino and Grasshopper IDs
Konstru uses two IDs in Grasshopper to identify elements: Grasshopper ID: This is the GH components ID (and iteration) representing the actual component (eg. Create Beam) which created you Konstru ...
-
Maximilian created an article,
ETABS Floor Extrusion directions
After importing a model to Etabs you might spot varying extrusion directions of floors. Some might be extruded upwards why others are extruded downwards. But all floors have justifications (Cardina...
-
Maximilian created an article,
Revit Wall Heights and Bounds
Some users asked us, why don't we bind walls to TopConstraints? Here is why: Revit seems to have issues updating parameters if constraints are applied. Going with unconnected Height is safer and ha...
-
Maximilian created an article,
Convert Shafts to hosted Openings
Konstru now lets you convert shafts automatically to hosted openings in CSI tools. So far, shafts haven't been translated because they didn't exist as such in CSI tools. This new option allows you ...
-
Maximilian created an article,
Known Issues
Currently there is are following known issues: Please keep Revit Floor & Wall Type and Profile Section Names unique. This means a Wall type named "SLAB 225" and a Beam Type named "SLAB 225" will c...
-
Maximilian created an article,
Clear a Model
If you want to clear a model entirely by uploading an empty Revit or Etabs Model into Konstru, keep in mind that those models are never entirely empty. All platforms are containing a minimum of lev...
-
Maximilian created an article,
Material Unknown
Why is Revit uploading an UNKNOWN Material and creates this possibly on download? We cannot read all materials from Revit the same. Often materials of wall or floor layers are set to <By Category> ...
-
Maximilian created an article,
Multi Segmented Grids
Multi-segmented Revit grids will turn into single grid lines in Konstru. Since most applications do not understand multi-segmented grid lines we don't recommend to use them. In Revit multi-segment...